Push Pin

BGA Stock Clearance

Great Prices Available

aluminium extrusion bga heatsink

Following a recent stocktake, ABL has surplus stocks of certain BGA part numbers, particularly
BGA-STD-025, with dimensions of
23mm x 23mm x 6mm.
(Same dimensions as Fischer ICK BGA 23x23). We can offer very competitive prices on this and several other parts.
Please contact us for details.

Model  Width 
Pin  Pitch 
 L / W 
 Hole Dia 
BGA-PP-010 40.8 40.8 15.0 Natural Y 20x20 n/a 11.00 5.50 B 14.0 48 3.2
BGA-PP-015 49.0 49.0 10.0 Natural Y 30x30 n/a 10.50 4.20 A 14.0 60 3.2
BGA-PP-020 49.0 49.0 15.0 Natural Y 30x30 n/a 9.00 4.00 B 14.0 60 3.2
BGA-PP-025 49.0 49.0 15.0 Natural Y 30x30 n/a 9.00 4.00 A 16.4 60 3.2
BGA-PP-030 49.0 49.0 35.0 Natural Y 30x30 n/a 7.00 3.80 B 14.0 60 3.2
BGA-PP-035 49.0 49.0 20.0 Black Y 30x30 n/a 7.00 3.70 A 16.4 60 3.2
BGA-PP-040 49.0 49.0 35.0 Black Y 30x30 n/a 6.50 3.50 B 14.0 60 3.2
Stock Category
A stocked item short lead time
B lead times vary
C Minimum Order Quantities apply

All dimensions shown are subject to commercial tolerances. Details of individual tolerances and fully dimensioned drawings available on request.

Thermal Resistance is calculated based on a distributed heat load on anodised heatsink with vertically mounted fins based on a 60ºC temperature rise. Under general operating conditions the thermal mounting arrangement of devices is not known and therefore the figures should be used only as a guide to selection.
We recommend that the effectiveness of any heat sink is tested in the specific operating environment in which it will be subjected.
All information is for reference purposes only.