Board Mount PPN Heat Sinks

PPN
PPN
 Length   Part Number 
 Without Pins 
 Clip   Thermal Rating 
°C/W
Stock
 Category 
50.0 PPN0500B 02 5.00 A
75.0 PPN0750B 02 3.70 A
100.0 PPN1000B 02 3.10 A
150.0 PPN1500B 02 2.30 A

All dimensions shown are subject to commercial tolerances. Details of individual tolerances and fully dimensioned drawings available on request.

Where a device is shown it is for illustrative purposes only. The heatsink is supplied without a device. Most board mount and bga heatsinks are supplied black anodised to assist thermal performance.

Thermal Resistance is calculated based on a distributed heat load on anodised heatsink with vertically mounted fins based on a 60ºC temperature rise. Under general operating conditions the thermal mounting arrangement of devices is not known and therefore the figures should be used only as a guide to selection.
We recommend that the effectiveness of any heatsink is tested in the specific operating environment in which it will be subjected.
All information is for reference purposes only.

This heatsink is suitable
for use with device(s):
TO220, TO218, TO247

Please see the accessories page for more details on clips, wire forms and interface material or contact us.