Board Mount PPD Heat Sinks

 Length   Part Number 
 Without Pins 
 Part Number 
 With Pins 
 Holes   Clip   Thermal Rating 
25.0 PPD25B PPD25BP No 03 9.00 A
25.0 PPD25BH PPD25BPH Yes 03 9.00 A
38.0 PPD38P PPD38BP No 03 7.00 A
38.0 PPD38BH PPD38BPH Yes 03 7.00 A
50.0 PPD50B PPD50BP No 03 5.50 A
50.0 PPD50BH PPD50BPH Yes 03 5.50 A
63.0 PPD63B PPD63BP No 03 4.50 A
63.0 PPD63BH PPD63BPH Yes 03 4.50 A

All dimensions shown are subject to commercial tolerances. Details of individual tolerances and fully dimensioned drawings available on request.

Where a device is shown it is for illustrative purposes only. The heatsink is supplied without a device. Most board mount and bga heatsinks are supplied black anodised to assist thermal performance.

Thermal Resistance is calculated based on a distributed heat load on anodised heatsink with vertically mounted fins based on a 60ºC temperature rise. Under general operating conditions the thermal mounting arrangement of devices is not known and therefore the figures should be used only as a guide to selection.
We recommend that the effectiveness of any heatsink is tested in the specific operating environment in which it will be subjected.
All information is for reference purposes only.

This heatsink is suitable
for use with device(s):
TO220, TO218, TO247

Please see the accessories page for more details on clips, wire forms and interface material or contact us.