Board Mount PP Heat Sinks

 Length   Part Number 
 Without Pins 
 Part Number 
 With Pins 
 Holes   Cut Out   Clip   Thermal Rating 
25.0 PP25B PP25BP No No 01 12.00 A
25.0 PP25BH PP25BPH Yes No 01 12.00 A
25.0 PP25BHC PP25BPHC Yes Yes 01 12.00 A
32.0 PP32B PP32BP No No 01 11.00 A
32.0 PP32BH PP32BPH Yes No 01 11.00 A
32.0 PP32BHC PP32BPHC Yes Yes 01 11.00 A
38.0 PP38B PP38BP No No 01 10.00 A
38.0 PP38BH PP38BPH Yes No 01 10.00 A
38.0 PP38BHC PP38BPHC Yes Yes 01 10.00 A
50.0 PP50B PP50BP No No 01 8.30 A
50.0 PP50BH PP50BPH Yes No 01 8.30 A
50.0 PP50BHC PP50BPHC Yes Yes 01 8.30 A
63.0 PP63B PP63BP No No 01 6.90 A
63.0 PP63BH PP63BPH Yes No 01 6.90 A
63.0 PP63BHC PP63BPHC Yes Yes 01 6.90 A

All dimensions shown are subject to commercial tolerances. Details of individual tolerances and fully dimensioned drawings available on request.

Where a device is shown it is for illustrative purposes only. The heatsink is supplied without a device. Most board mount and bga heatsinks are supplied black anodised to assist thermal performance.

Thermal Resistance is calculated based on a distributed heat load on anodised heatsink with vertically mounted fins based on a 60ºC temperature rise. Under general operating conditions the thermal mounting arrangement of devices is not known and therefore the figures should be used only as a guide to selection.
We recommend that the effectiveness of any heatsink is tested in the specific operating environment in which it will be subjected.
All information is for reference purposes only.

This heatsink is suitable
for use with device(s):
TO220, TO218, TO247

Please see the accessories page for more details on clips, wire forms and interface material or contact us.