Standard



BGA Stock Clearance

Great Prices Available

aluminium extrusion bga heatsink

Following a recent stocktake, ABL has surplus stocks of certain BGA part numbers, particularly
BGA-STD-025, with dimensions of
23mm x 23mm x 6mm.
(Same dimensions as Fischer ICK BGA 23x23). We can offer very competitive prices on this and several other parts.
Please contact us for details.

Model  Width 
[mm]
 Length 
[mm]
 Height 
[mm]
 Anodised 
 Finish 
 Thermal 
Tape 
  Pad  
  Size  
[mm]
 Wire
Form 
 °C/W
 Natural 
 °C/W
 Forced 
2M/s
 Stock 
 Caty 
 Pin 
 Length 
[mm]
Pin  Pitch 
 L / W 
[mm]
 Hole Dia 
 [mm] 
BGA-STD-010 13.5 13.0 10.0 Black Y 12x12 - 27.00 14.50 A n\a n\a n\a
BGA-STD-015 14.0 14.0 10.0 Black Y 12x12 - 26.50 14.00 A n\a n\a n\a
BGA-STD-020 21.0 21.0 9.0 Black Y 20X20 - 24.50 13.00 A n\a n\a n\a
BGA-STD-025 23.0 23.0 6.0 Black Y 20x20 - 22.00 10.50 A n\a n\a n\a
BGA-STD-030 27.0 27.0 6.0 Black Y 20x20 WF700/WF300 20.00 10.00 A n\a n\a n\a
BGA-STD-035 26.0 26.0 8.0 Black Y 20x20 WF700/WF300 18.50 9.70 A n\a n\a n\a
BGA-STD-040 27.0 27.0 6.0 Black Y 20x20 WF700/WF300 16.00 10.20 A n\a n\a n\a
BGA-STD-045 23.0 23.0 18.0 Black Y 20x20 WF700/WF300 14.70 7.30 A n\a n\a n\a
BGA-STD-050 20.0 20.0 19.1 Black Y 18x18 - 14.00 5.80 A n\a n\a n\a
BGA-STD-055 25.9 23.9 10.0 Black Y 20x20 WF700/WF300/WF151 14.00 6.00 A n\a n\a n\a
BGA-STD-060 40.0 40.0 10.0 Black Y 30x30 - 13.50 7.50 A n\a n\a n\a
BGA-STD-065 27.8 27.8 11.2 Black Y 20x20 WF700/WF300 12.20 5.80 A n\a n\a n\a
BGA-STD-070 40.0 40.0 25.0 Black Y 30x30 WF700/WF300/WF151 11.50 6.00 A n\a n\a n\a
BGA-STD-075 40.0 40.0 23.0 Black Y 18x18 WF700/WF300/WF151 11.00 5.60 A n\a n\a n\a
BGA-STD-080 27.0 27.0 25.0 Black Y 20x20 WF700/WF300/WF151 10.50 4.50 A n\a n\a n\a
BGA-STD-085 30.7 30.7 14.1 Black Y 20x20 WF700/WF300 10.00 5.20 A n\a n\a n\a
BGA-STD-090 40.0 23.9 10.0 Black Y 20x20 - 10.00 5.20 A n\a n\a n\a
BGA-STD-095 40.0 40.0 10.0 Black Y 18x18 WF700/WF300 9.70 4.00 A n\a n\a n\a
BGA-STD-100 38.1 38.1 16.0 Black Y 30x30 - 9.20 4.10 A n\a n\a n\a
BGA-STD-105 35.0 35.0 18.0 Black Y 30x30 WF700/WF300/WF151 9.20 5.20 A n\a n\a n\a
BGA-STD-110 35.0 35.0 25.0 Black Y 30x30 WF700/WF300/WF151 8.50 5.00 A n\a n\a n\a
BGA-STD-115 40.0 40.0 18.0 Black Y 30x30 WF700/WF300/WF151 8.20 5.10 A n\a n\a n\a
BGA-STD-120 40.6 38.8 30.5 Black Y 30x30 - 7.00 3.70 A n\a n\a n\a
Stock Category
A stocked item short lead time
B lead times vary
C Minimum Order Quantities apply

All dimensions shown are subject to commercial tolerances. Details of individual tolerances and fully dimensioned drawings available on request.

Thermal Resistance is calculated based on a distributed heat load on anodised heatsink with vertically mounted fins based on a 60ºC temperature rise. Under general operating conditions the thermal mounting arrangement of devices is not known and therefore the figures should be used only as a guide to selection.
We recommend that the effectiveness of any heat sink is tested in the specific operating environment in which it will be subjected.
All information is for reference purposes only.